First
we will learn to install
computer motherboard in the computer case. Then we will learn to
install power supply in the case.
Step by step guide
to install motherboard
1) Find sufficient clean work surface with sufficient light to build
computer.
2) You will require minimum to 2 mains power
outlets for computer checking.
3) You will also require good quality screw driver set and anti-static
strap set.
4) Connect spike guard to mains power to get multiple outlets.
5) Get all the component boxes and place it nearby.
Important
Tip 1 - Always fasten the screw clockwise and unfasten it anticlockwise.
Start to build
computer
Getting exited!
Cool down buddy. And don't be in hurry to connect the power supply to
mains outlet.
We will start with
computer case and power supply. Now a days computer cases are built in
with the power supply. If power supply is not fitted, please follow
these steps.
Try to find a PSU
with a minimum power rating of 300 watts. Get the power supply box.
Unpack the power supply. Also unpack the computer case. Check the
fitting screw kit. Check the instruction guide to decide how to open
the case. In most cases, we have to remove side covers. Now check the
back side of case to find fan hole. Generally this hole is at the top
side. You have to mount the power supply so that fan of power supply
will match with the large hole. You should ensure that the fan outlet
and power socket on the Power supply will face outward. Now tighten the
fixing screws with the help of proper screw driver to hold the Power
supply in place.
Back side Photo of
case with power supply fitted.
Now your cheap computer case is ready. But don't connect the mains
power. But set the proper voltage setting i.e. 115/230 V switch
setting.
Let us start to install computer motherboard.
Now unpack the
motherboard.Generally it is packed in anti static bag. On the
motherboard you will notice small holes with metallic rings. Find the
matching points inside the case to install computer motherboard. Use
fixing supplied with the case to allow you to screw the motherboard
into place. These fixing will raise the motherboard around half an inch
off the mounting plate. For additional precaution, you can place
insulation sheet, between case and motherboard. Please note that the
components are soldered on motherboard.
Important Tip 2 - The solder side of motherboard should not touch the
case. As this may result in short circuit which will ultimately damage
the motherboard circuit.
The Motherboard should always be fitted such that back panel connectors
are accessible to the rear of the case.See the photo carefully to
install computer motherboard and it's various sections. Read valueable motherboard tips
here.
To install computer motherboard, here is the side view.
This cheap computer will give you value for your money.
Now let us see how to install the Intel Pentium 4 CPU.
Now you know how to install computer motherboard, let us go to build PC stage 2, Here we will learn to install CPU and RAM.
The motherboards in the laptops are somewhat different from the desktop motherboards. They are designed to be suited primarily for laptops. The cost ...